После установки драйвера geforce 9600GT моргает и не может запустить X-сервер так и оставаясь в командной строке, но после исправления в xorg строку Driver "nvidia" на "nv", запускает со стандартными дровами без ускорения. Как зделать что б он подхватил установленный драйвер?
0
Linux не подхватывает установленный видеодрайвер
Автор Angel Of Nemesis, 01 окт 2010 20:12
Сообщений в теме: 7
#1
Отправлено 01 октября 2010 - 20:12
#2
Отправлено 01 октября 2010 - 21:24
А если запустить setup и выбрать настройку иксов видеокарта правильно определяется?
#3
Отправлено 01 октября 2010 - 21:56
дистрибутив какой? что пишет в /var/log/Xorg* ? может что-то с развёрткой? как настраивали xorg.conf?
think different
#4
Отправлено 02 октября 2010 - 08:29
never mind (Oct 1 2010, 22:55) писал:
дистрибутив какой? что пишет в /var/log/Xorg* ? может что-то с развёрткой? как настраивали xorg.conf?
Цитата
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) Oct 02 13:12:16 NVIDIA(0): Enabling RENDER acceleration
(II) Oct 02 13:12:16 NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
(II) Oct 02 13:12:16 NVIDIA(0): enabled.
(EE) Oct 02 13:12:16 NVIDIA(0): Failed to initialize the NVIDIA graphics device PCI:1:0:0.
(EE) Oct 02 13:12:16 NVIDIA(0): Please check your system's kernel log for additional error
(EE) Oct 02 13:12:16 NVIDIA(0): messages and refer to Chapter 8: Common Problems in the
(EE) Oct 02 13:12:16 NVIDIA(0): README for additional information.
(EE) Oct 02 13:12:16 NVIDIA(0): Failed to initialize the NVIDIA graphics device!
(II) UnloadModule: "nvidia"
(II) UnloadModule: "wfb"
(II) UnloadModule: "fb"
(EE) Screen(s) found, but none have a usable configuration.
Fatal server error:
no screens found
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) Oct 02 13:12:16 NVIDIA(0): Enabling RENDER acceleration
(II) Oct 02 13:12:16 NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
(II) Oct 02 13:12:16 NVIDIA(0): enabled.
(EE) Oct 02 13:12:16 NVIDIA(0): Failed to initialize the NVIDIA graphics device PCI:1:0:0.
(EE) Oct 02 13:12:16 NVIDIA(0): Please check your system's kernel log for additional error
(EE) Oct 02 13:12:16 NVIDIA(0): messages and refer to Chapter 8: Common Problems in the
(EE) Oct 02 13:12:16 NVIDIA(0): README for additional information.
(EE) Oct 02 13:12:16 NVIDIA(0): Failed to initialize the NVIDIA graphics device!
(II) UnloadModule: "nvidia"
(II) UnloadModule: "wfb"
(II) UnloadModule: "fb"
(EE) Screen(s) found, but none have a usable configuration.
Fatal server error:
no screens found
Цитата
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder75) Fri Mar 12 01:42:27 PST 2010
# Xorg configuration created by pyxf86config
Section "ServerLayout"
Identifier "Default Layout"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# keyboard added by rhpxl
Identifier "Keyboard0"
Driver "kbd"
Option "XkbModel" "pc105"
Option "XkbLayout" "us,ru"
Option "XkbOptions" "grp:shifts_toggle,grp_led:scroll"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 28.0 - 33.0
VertRefresh 43.0 - 72.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Videocard0"
Driver "nvidia"
EndSection
Section "Screen"
Monitor "Monitor0"
Identifier "Screen0"
Device "Videocard0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
# nvidia-xconfig: version 1.0 (buildmeister@builder75) Fri Mar 12 01:42:27 PST 2010
# Xorg configuration created by pyxf86config
Section "ServerLayout"
Identifier "Default Layout"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# keyboard added by rhpxl
Identifier "Keyboard0"
Driver "kbd"
Option "XkbModel" "pc105"
Option "XkbLayout" "us,ru"
Option "XkbOptions" "grp:shifts_toggle,grp_led:scroll"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 28.0 - 33.0
VertRefresh 43.0 - 72.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Videocard0"
Driver "nvidia"
EndSection
Section "Screen"
Monitor "Monitor0"
Identifier "Screen0"
Device "Videocard0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Сообщение отредактировал Angel Of Nemesis: 02 октября 2010 - 08:37
#5
Отправлено 02 октября 2010 - 16:39
попробуй Modes добавить в SubSection.
Добавлено через 1 мин.:
в догонку попробуй конфиг перелопатить через
Section "Screen" Identifier "Screen0" Device "Videocard0" Monitor "Monitor0" DefaultDepth 24 SubSection "Display" Depth 24 Modes "1600x1200" "1280x1024" "1024x768" "800x600" "640x480" EndSubSection EndSectionесли модуль вызрузить/загрузить не ругается?
rmmod nvidia && modprob nvidia
Добавлено через 1 мин.:
в догонку попробуй конфиг перелопатить через
Цитата
X -configure
think different
#6
Отправлено 04 октября 2010 - 00:15
как-то раз сталкивался с такой фигней, тоже на 9600гт
помогли более древние дрова
помогли более древние дрова
#7
Отправлено 05 октября 2010 - 23:49
кстати покажи dmesg после загрузки модуля nvidia
think different
#8
Отправлено 06 октября 2010 - 19:08
Не стал далее этим заниматься, откатился на 12 версию, там все норм. Вообще, погуглил, на разных форумах говорят что несовместимость данного ядра с дровами.
Количество пользователей, читающих эту тему: 2
0 пользователей, 2 гостей, 0 анонимных